Michele Reynolds
http://inspirationink.typepad.com/inspiration-ink/ michelerey@aol.com |
Trees For Sale Moonlight Camper |
P retty card using Stampin' Up! products including one that can be earned for FREE during Sale-A-Bration 2022.
Cut cardstock, glimmer paper, foil, and vellum pieces to the following sizes using a Paper Trimmer:
- card from Starry Sky Cardstock at 5-1/2" x 8-1/2" and scored at 4-1/4"
- 4" x 5-1/4" of Starry Sky or Orchid Oasis glimmer paper from 2022-2024 In Color 6" x 6" Glimmer Paper
- 2" x 5-1/4" from Soft Succulent Cardstock
- 3" x 3-1/2" from Soft Succulent Cardstock
- 2" x 3" of matte finish silver foil from Silver Foil 12" x 12" Specialty Pack
- 1-1/4" x 2-3/4" from Basic White Cardstock
- 1" x 2" of black script on vellum from Vellum 12" x 12" Layering Designs
- 1/2" x 1-1/4" from Starry Sky Cardstock
- 1" x 3-1/2" from Orchid Oasis Cardstock
- 1-1/4" x 1-1/2" from Basic Gray Cardstock
- 2" square of white glimmer paper from Real Red & White 6" x 6" Glimmer Paper
Use your fingers to tear the 2" x 5-1/4" piece of Soft Succulent Cardstock in half longways. Keep both pieces.
Adhere one of the strips of torn Soft Succulent Cardstock to the bottom of the horizontal Starry Sky or Orchid Oasis glimmer paper rectangle so the flat left, bottom, and right edges are even and the darker glimmer paper is on the top of the rectangle.
Adhere the other strip of torn Soft Succulent Cardstock to the bottom of the horizontal Starry Sky or Orchid Oasis glimmer paper rectangle so it is tucked under the top of the first strip with the torn edge on top and the the flat left and right edges are even.
As you are ready to stamp using the Art Gallery Set, place the cardstock on the Stampin' Pierce Mat. Using the mat will help you get a cleaner image each time you stamp.
Mount the sentiment of choice from the Art Gallery Set on Block G. Ink it up with the Starry Sky Ink Pad. Stamp it in the center of the thin strip of Orchid Oasis Cardstock so the end of the sentiment is closer to the left edge of the strip.
Pick out the long, wavy edge, banner die from the Floral Gallery Dies. Put it on top of the stamped sentiment on a platform on your Stampin' Cut & Emboss Machine so the sentiment is centered in the die top to bottom and slightly closer to the left edge. Run through the machine.
Adhere the sentiment cut out to the bottom of the layered glimmer paper/torn Soft Succulent strips so it is about 1/2" from the bottom edge and the end of the sentiment is close to the right edge.
Use Paper Snips Scissors to cut off excess Orchid Oasis cardstock along the right edge.
Adhere the layered glimmer paper with sentiment attached to the front of the Starry Sky card.
As you are ready to stamp using the Trees For Sale Set, place the cardstock on the Stampin' Pierce Mat. Using the mat will help you get a cleaner image each time you stamp.
Mount the large, solid tree image from the Trees For Sale Set on Block D. Ink it up with the Soft Succulent Ink Pad. Stamp it on one side of the horizontal 3" x 3-1/2" Soft Succulent rectangle leaving room to stamp another tree and to cut it out.
Mount the medium, solid tree image from the Trees For Sale Set on Block C. Ink it up with the Soft Succulent Ink Pad. Stamp it on the other side of the horizontal 3" x 3-1/2" Soft Succulent rectangle leaving room to cut it out.
Mount the large, detailed tree image from the Trees For Sale Set on Block D. Ink it up with the Evening Evergreen Ink Pad. Stamp it over the top of the previously stamped solid, large tree image. WITHOUT RE-INKING, stamp it again just slightly offset from the first image.
Mount the medium, detailed tree image from the Trees For Sale Set on Block C. Ink it up with the Evening Evergreen Ink Pad. Stamp it over the top of the previously stamped solid, medium tree image. WITHOUT RE-INKING, stamp it again just slightly offset from the first image.
Pick out the matching, open large tree die and the matching, open medium tree die from the Tree Lot Dies. Put them on top of the stamped trees on a platform on your Stampin' Cut & Emboss Machine so the trees are centered in the dies. Make sure the dies do NOT overlap. Run through the machine.
Adhere the large tree cut out to the front of the card so the base just overlaps the top of the top, torn Soft Succulent strip on the left side. The left edge of the tree cut out should be about 1/2" from the left edge of the card.
Adhere the medium tree cut out to the front of the card so the left side just overlaps the right side of the large tree cut out and the top point of the tree cut out is about 5/8" from the top of the card.
Pick out the camper die from the Tree Lot Dies. Put it on top of the silver foil rectangle on a platform on your Stampin' Cut & Emboss Machine. Run through the machine. Use the paper-piercing tool on the Take Your Pick to remove the pieces if needed.
Note: Throw away the rectangular and circular window cut outs or save them for use on another project.
Pick out the combined camper top and siding die from the Tree Lot Dies. Put it on top of the small Basic White strip on a platform on your Stampin' Cut & Emboss Machine. Run through the machine. Use the paper-piercing tool on the Take Your Pick to remove the pieces if needed.
Use Multipurpose Liquid Glue or Fine-Tip Glue Pen to adhere the white camper top piece die cut to the top of the foil camper cut out and the white camper siding piece die cut to the bottom of the foil camper cut out.
Flip the camper cut out upside down. Put adhesive around the window cut outs. Adhere the small strip of vellum to the back of the camper cut out so the vellum will show through the window cut outs. Use Paper Snip Scissors as needed to trim off excess vellum sticking out past the edges of the camper cut out.
Flip the camper cut out back right side up.
Pick out the tiny, wavy, curtain die from the Tree Lot Dies. Put it on top of the tiny strip of Starry Sky Cardstock on a platform on your Stampin' Cut & Emboss Machine. Run through the machine. Use the paper-piercing tool on the Take Your Pick to remove the pieces if needed.
Use Multipurpose Liquid Glue or Fine-Tip Glue Pen to adhere the tiny curtain cut out to the top of the rectangular window cut out on the front of the camper die cut.
Use Stampin' Dimensionals and Mini Stampin' Dimensionals to adhere the completed assembled camper die cut to the front of the card on the lower left side. Make sure the bottom of the medium tree cut out is tucked behind the top of the camper.
Pick out the smooth circle die that cuts out a 1-5/8" circle from the Layering Circles Dies. Put it on top of the white glimmer paper square on a platform on your Stampin' Cut & Emboss Machine. Run through the machine.
Adhere the white glimmer paper circle cut out to the front of the card in the upper right corner as shown.
Mount the dog image from the Trees For Sale Set on Block B. Ink it up with the Tuxedo Black Memento Ink Pad. Stamp it in the center of the small Basic Gray rectangle.
Pick out the matching dog die from the Tree Lot Dies. Put it on top of the stamped dog on a platform on your Stampin' Cut & Emboss Machine so the image is centered in the die. Run through the machine.
Use Mini Stampin' Dimensionals to adhere the dog cut out to the front of the card at a slight angle as shown so the back feet just overlap the top of the sentiment cut out a tiny bit.
Use the mini spatula on the Take Your Pick to carefully peel up 7 small and medium size jewels from a sheet of Rhinestone Basic Jewels making sure that you get the adhesive backings as well. Adhere them randomly to the Starry Sky or Orchid Oasis glimmer paper as stars.